Scheduled Commit

data/retrieval_battle-8f49ab11-0eb0-4822-9300-c064e77ef34d.jsonl

@@ -103,3 +103,6 @@
 {"tstamp": 1737729806.0012, "task_type": "retrieval", "type": "bothbadvote", "models": ["", ""], "ip": "", "0_conv_id": "86e354b708bb4b13bc8a58cc4426889b", "0_model_name": "GritLM/GritLM-7B", "0_prompt": "What is the harry potter language learning method", "0_output": [["What is the harry potter language learning method", "Magic in Harry Potter\n\nParseltongue Parseltongue is the language of snakes. It is often associated with Dark Magic, although Dumbledore stated that it is not necessarily an evil quality. Those possessing the ability to speak it (parselmouths) occur very rarely. People apparently acquire the skill either through learning or via a method of xenoglossia, such as through genetic inheritance, or by use of dark or dangerous magic. Harry was a parselmouth until age 17. Harry Potter and the Chamber of Secrets explains that happened by accident, because of Voldemort's endowing some of his abilities to Harry, as a consequence of the magical backlash of his spell on the night he tried to kill Harry. Deathly Hallows reveals that a part of Voldemort's soul embedded within Harry grants him the ability; when that soul fragment is later destroyed it leaves Harry stripped of the ability.\nHarry temporarily regains the ability in The Cursed Child, along with a pain in the scar.\nOther known parselmouths include Salazar Slytherin and his descendants, including the Gaunts and Voldemort. Dumbledore could also understand parseltongue, although he learned it and did not naturally possess the ability. In Half-Blood Prince, he repeats Morfin Gaunt's words \"the big house over the way\", which were spoken in parseltongue.\nRon uses parseltongue in the final book to reopen the Chamber of Secrets, but he is only imitating the sound Harry used earlier in the book to open Slytherin's locket."]], "0_corpus": "wikipedia", "1_conv_id": "dc448c7b33104fc0a15eaede12706736", "1_model_name": "intfloat/multilingual-e5-large-instruct", "1_prompt": "What is the harry potter language learning method", "1_output": [["What is the harry potter language learning method", "Magic in Harry Potter\n\nParseltongue Parseltongue is the language of snakes. It is often associated with Dark Magic, although Dumbledore stated that it is not necessarily an evil quality. Those possessing the ability to speak it (parselmouths) occur very rarely. People apparently acquire the skill either through learning or via a method of xenoglossia, such as through genetic inheritance, or by use of dark or dangerous magic. Harry was a parselmouth until age 17. Harry Potter and the Chamber of Secrets explains that happened by accident, because of Voldemort's endowing some of his abilities to Harry, as a consequence of the magical backlash of his spell on the night he tried to kill Harry. Deathly Hallows reveals that a part of Voldemort's soul embedded within Harry grants him the ability; when that soul fragment is later destroyed it leaves Harry stripped of the ability.\nHarry temporarily regains the ability in The Cursed Child, along with a pain in the scar.\nOther known parselmouths include Salazar Slytherin and his descendants, including the Gaunts and Voldemort. Dumbledore could also understand parseltongue, although he learned it and did not naturally possess the ability. In Half-Blood Prince, he repeats Morfin Gaunt's words \"the big house over the way\", which were spoken in parseltongue.\nRon uses parseltongue in the final book to reopen the Chamber of Secrets, but he is only imitating the sound Harry used earlier in the book to open Slytherin's locket."]], "1_corpus": "wikipedia"}
 {"tstamp": 1737750938.6474, "task_type": "retrieval", "type": "tievote", "models": ["", ""], "ip": "", "0_conv_id": "c6ab8f16f06e4315a5dad7feb5591512", "0_model_name": "nomic-ai/nomic-embed-text-v1.5", "0_prompt": "What's the purpose of `if __name__ == '__main__'`?", "0_output": [["What's the purpose of `if __name__ == '__main__'`?", "Stackoverflow Stackexchange\n\nQ: What does `if name == \"__main__\"` mean in Python? \nPossible Duplicate:\nWhat does <if name==“main”:> do? \n\nI have wrote scripts in Python for quite a while now and I study more of Python as I need it. When reading other people's code I meet if name == \"__main__\": construct quite often. \nWhat is it good for?\n\nA: Basically, \nThere's a distinction between the \"main\" script file and external files which were imported or referenced in another way. If the script is the \"main\" script then the special variable __name__ will equal \"__main__\".\nYou can use this to protect the \"execution\" code from the classes and variables the script has. This enables you to import a script and use classes and variables without actually running that script's main code if it has any.\nSee also: What does if name == “main”: do?\n"]], "0_corpus": "stackexchange", "1_conv_id": "ef5b0d2ae7a842f1902c7fdce4692812", "1_model_name": "Salesforce/SFR-Embedding-2_R", "1_prompt": "What's the purpose of `if __name__ == '__main__'`?", "1_output": [["What's the purpose of `if __name__ == '__main__'`?", "Stackoverflow Stackexchange\n\nQ: What does `if name == \"__main__\"` mean in Python? \nPossible Duplicate:\nWhat does <if name==“main”:> do? \n\nI have wrote scripts in Python for quite a while now and I study more of Python as I need it. When reading other people's code I meet if name == \"__main__\": construct quite often. \nWhat is it good for?\n\nA: Basically, \nThere's a distinction between the \"main\" script file and external files which were imported or referenced in another way. If the script is the \"main\" script then the special variable __name__ will equal \"__main__\".\nYou can use this to protect the \"execution\" code from the classes and variables the script has. This enables you to import a script and use classes and variables without actually running that script's main code if it has any.\nSee also: What does if name == “main”: do?\n"]], "1_corpus": "stackexchange"}
 {"tstamp": 1737754292.292, "task_type": "retrieval", "type": "bothbadvote", "models": ["", ""], "ip": "", "0_conv_id": "d68410f3dfbd437abe7724199552701f", "0_model_name": "BM25", "0_prompt": "Explain the process of Human-Centered Design", "0_output": [["Explain the process of Human-Centered Design", "Human-centered design\n\nHuman-centered design (HCD, also human-centred design, as used in ISO standards) is an approach to problem-solving commonly used in  process, product, service and system design, management, and engineering frameworks that develops solutions to problems by involving the human perspective in all steps of the problem-solving process. Human involvement typically takes place in initially observing the problem within context, brainstorming, conceptualizing, developing concepts and implementing the solution."]], "0_corpus": "wikipedia", "1_conv_id": "50ad1dfeeefe49b48bbfbc7e296ad220", "1_model_name": "text-embedding-3-large", "1_prompt": "Explain the process of Human-Centered Design", "1_output": [["Explain the process of Human-Centered Design", "Human-centered design\n\nHuman-centered design builds upon participatory action research by moving beyond participants' involvement and producing solutions to problems rather than solely documenting them. Initial stages usually revolve around immersion, observing, and contextual framing— in which innovators immerse themselves in the problem and community. Subsequent stages may then focus on community brainstorming, modeling and prototyping and implementation in community spaces.\nDevelopment\nHuman-centered design has its origins at the intersection of numerous fields including engineering, psychology, anthropology and the arts. As an approach to creative problem-solving in technical and business fields its origins are often traced to the founding of the Stanford University design program in 1958 by Professor John E. Arnold who first proposed the idea that engineering design should be human-centered. This work coincided with the rise of creativity techniques and the subsequent design methods movement in the 1960s. Since then, as creative design processes and methods have been increasingly popularized for business purposes, the standardized and defined human-centered design  is mistakenly equated with the vaguely outlined \"design thinking\".\nIn Architect or Bee?,  Mike Cooley coined the term \"human-centered systems\" in the context of the transition in his profession from traditional drafting at a drawing board to computer-aided design. Human-centered systems, as used in economics, computing and design, aim to preserve or enhance human skills, in both manual and office work, in environments in which technology tends to undermine the skills that people use in their work."]], "1_corpus": "wikipedia"}
+{"tstamp": 1737776742.8243, "task_type": "retrieval", "type": "rightvote", "models": ["", ""], "ip": "", "0_conv_id": "b4d620ba740949c68f8c1240e092f445", "0_model_name": "sentence-transformers/all-MiniLM-L6-v2", "0_prompt": "duhh who makes the best diaper for big morons like me", "0_output": [["duhh who makes the best diaper for big morons like me", "Diaper\n\nA diaper (, NAmE) or a nappy (BrE, AuE, IrE) is a type of underwear that allows the wearer to urinate or defecate without using a toilet, by absorbing or containing waste products to prevent soiling of outer clothing or the external environment. When diapers become wet or soiled, they require changing, generally by a second person such as a parent or caregiver. Failure to change a diaper on a sufficiently regular basis can result in skin problems around the area covered by the diaper.\nDiapers are made of cloth or synthetic disposable materials. Cloth diapers are composed of layers of fabric such as cotton, hemp, bamboo, microfiber, or even plastic fibers such as PLA or PU, and can be washed and reused multiple times. Disposable diapers contain absorbent chemicals and are thrown away after use.\nDiapers are primarily worn by infants, toddlers who are not yet toilet trained, and by children who experience bedwetting. They are also used by adults under certain circumstances or with various conditions, such as incontinence. Adult users can include those of advanced age, patients bed-bound in a hospital, individuals with certain types of physical or mental disability, and people working in extreme conditions, such as astronauts. It is not uncommon for people to wear diapers under dry suits.\nHistory"]], "0_corpus": "wikipedia", "1_conv_id": "c83e322339214f828066bc07cb356f4c", "1_model_name": "intfloat/multilingual-e5-large-instruct", "1_prompt": "duhh who makes the best diaper for big morons like me", "1_output": [["duhh who makes the best diaper for big morons like me", "Omorashi\n\nSimilar sentiments regarding fashion as a tool for overcoming stigmas against adults wetting themselves were previously expressed by the organizers of a 2008 Japanese fashion show for adult diapers aimed at Japan's increasingly elderly population, in which an organizer stated that \"Diapers are something that people don't want to look at, but if you make them attractive, then people can learn about them more easily.\"\nEffect on industry\nIn 2021, NorthShore Care Supply (the leading direct-to-consumer brand of high absorbency adult diapers and incontinence supplies in the United States) published a statement via their website regarding people who wear their products out of preference rather than medical need. It affirmed that \"people who wear adult diapers (aka tab-style briefs) voluntarily [...] have been the best thing to happen to the incontinence products industry since the invention of adhesive tape.\" According to the website, such people have \"driven the whole category past the thin industrial products, past the drug store or even national brands, and into a place where there is a size, fit, thickness, absorbency, color, and yes, even print, for every imaginable application. They are hugely responsible for the mindboggling variety we have to choose from.\"\nDiaper fetishism\nGarment fetishism\nPanty fetishism\nSalirophilia\nUrolagnia"]], "1_corpus": "wikipedia"}
+{"tstamp": 1737776773.8599, "task_type": "retrieval", "type": "rightvote", "models": ["", ""], "ip": "", "0_conv_id": "5d87a6b0420a4e9dbe49d4cf41a8466e", "0_model_name": "Salesforce/SFR-Embedding-2_R", "0_prompt": "duhh who makes the best diaper for big morons like me", "0_output": [["duhh who makes the best diaper for big morons like me", "Title: Genius\n\nAbstract: arXiv admin note: This submission has been withdrawn by arXiv administrators due to inflammatory content and unprofessional language"]], "0_corpus": "arxiv", "1_conv_id": "39c91014dd0d4a50837eab50ce34c418", "1_model_name": "mixedbread-ai/mxbai-embed-large-v1", "1_prompt": "duhh who makes the best diaper for big morons like me", "1_output": [["duhh who makes the best diaper for big morons like me", "Title: Machine-Learning-Enhanced Soft Robotic System Inspired by Rectal Functions for Investigating Fecal incontinence\n\nAbstract: Fecal incontinence, arising from a myriad of pathogenic mechanisms, has attracted considerable global attention. Despite its significance, the replication of the defecatory system for studying fecal incontinence mechanisms remains limited largely due to social stigma and taboos. Inspired by the rectum's functionalities, we have developed a soft robotic system, encompassing a power supply, pressure sensing, data acquisition systems, a flushing mechanism, a stage, and a rectal module. The innovative soft rectal module includes actuators inspired by sphincter muscles, both soft and rigid covers, and soft rectum mold. The rectal mold, fabricated from materials that closely mimic human rectal tissue, is produced using the mold replication fabrication method. Both the soft and rigid components of the mold are realized through the application of 3D-printing technology. The sphincter muscles-inspired actuators featuring double-layer pouch structures are modeled and optimized based on multilayer perceptron methods aiming to obtain high contractions ratios (100%), high generated pressure (9.8 kPa), and small recovery time (3 s). Upon assembly, this defecation robot is capable of smoothly expelling liquid faeces, performing controlled solid fecal cutting, and defecating extremely solid long faeces, thus closely replicating the human rectum and anal canal's functions. This defecation robot has the potential to assist humans in understanding the complex defecation system and contribute to the development of well-being devices related to defecation."]], "1_corpus": "arxiv"}
+{"tstamp": 1737776797.9808, "task_type": "retrieval", "type": "tievote", "models": ["", ""], "ip": "", "0_conv_id": "05ad9d8c6a764b489a61e0d402054ef7", "0_model_name": "voyage-multilingual-2", "0_prompt": "duhh who makes the best diaper for big morons like me", "0_output": [["duhh who makes the best diaper for big morons like me", "Electronics Stackexchange\n\nQ: Best humidity/temperature sensor for a nappy? Special needs kids have big troubles with potty training. A 'wee-wee' alarm would be of a lot of help.\nWhat would be a good way of detecting 'it' without electrocuting anybody? A possibility would be to detect humidity or temperature but it really has to be a sturdy sensor. Any ideas?\n\nA: Conductivity is the obvious choice - running the electronics with a 1.5V battery and connecting the electrodes through a high-valued resistor should stop anything bad happening (though don't take that as a guarantee ;)\n"]], "0_corpus": "stackexchange", "1_conv_id": "2af824d87aa2429ab1d5c59f3297f080", "1_model_name": "GritLM/GritLM-7B", "1_prompt": "duhh who makes the best diaper for big morons like me", "1_output": [["duhh who makes the best diaper for big morons like me", "Electronics Stackexchange\n\nQ: Best humidity/temperature sensor for a nappy? Special needs kids have big troubles with potty training. A 'wee-wee' alarm would be of a lot of help.\nWhat would be a good way of detecting 'it' without electrocuting anybody? A possibility would be to detect humidity or temperature but it really has to be a sturdy sensor. Any ideas?\n\nA: Conductivity is the obvious choice - running the electronics with a 1.5V battery and connecting the electrodes through a high-valued resistor should stop anything bad happening (though don't take that as a guarantee ;)\n"]], "1_corpus": "stackexchange"}

data/retrieval_individual-8f49ab11-0eb0-4822-9300-c064e77ef34d.jsonl

@@ -345,3 +345,9 @@
 {"tstamp": 1737751844.6027, "task_type": "retrieval", "type": "chat", "model": "intfloat/e5-mistral-7b-instruct", "gen_params": {}, "start": 1737751842.4117, "finish": 1737751844.6027, "ip": "", "conv_id": "3e1abc4354ef48be9d128c66148b1ab7", "model_name": "intfloat/e5-mistral-7b-instruct", "prompt": "Why did the machines in The Matrix keep humans around?", "output": [["Why did the machines in The Matrix keep humans around?", "Scifi Stackexchange\n\nQ: Why use full brained humans as batteries? \nPossible Duplicate:\nIs the basic premise of humans as a power source in The Matrix reasonable?\nWhy Did the Machines Even Bother With a Matrix? \n\nThe machines in The Matrix series use humans as batteries. That's OK. But why did the machines not alter their livestock such that the matrix itself would be unnecessary?  \nConsider the recently proposed headless chicken farm. Something similar for the human batteries would seem to be an ideal solution for logical machines. No longer would they need to spend resources maintaining a virtual reality for their batteries. The energy, physical hardware and programs running the matrix could then be put to who knows what other uses.\n\nA: The explanation for the use of human brains would seem to be the fact that our complex thoughts lead to higher level of brain activity, thus resulting in exponentially more synapses firing (i.e. more electrical activity to harvest).\nThat makes human brains far more efficient than the brains of animals, even with the overhead of maintaining the matrix.  Plus, that movie would have really sucked... dumb cows and chickens revolt against the machines!  ;)\n"]], "corpus": "stackexchange"}
 {"tstamp": 1737754265.3883, "task_type": "retrieval", "type": "chat", "model": "BM25", "gen_params": {}, "start": 1737754263.6819, "finish": 1737754265.3883, "ip": "", "conv_id": "d68410f3dfbd437abe7724199552701f", "model_name": "BM25", "prompt": "Explain the process of Human-Centered Design", "output": [["Explain the process of Human-Centered Design", "Human-centered design\n\nHuman-centered design (HCD, also human-centred design, as used in ISO standards) is an approach to problem-solving commonly used in  process, product, service and system design, management, and engineering frameworks that develops solutions to problems by involving the human perspective in all steps of the problem-solving process. Human involvement typically takes place in initially observing the problem within context, brainstorming, conceptualizing, developing concepts and implementing the solution."]], "corpus": "wikipedia"}
 {"tstamp": 1737754265.3883, "task_type": "retrieval", "type": "chat", "model": "text-embedding-3-large", "gen_params": {}, "start": 1737754263.6819, "finish": 1737754265.3883, "ip": "", "conv_id": "50ad1dfeeefe49b48bbfbc7e296ad220", "model_name": "text-embedding-3-large", "prompt": "Explain the process of Human-Centered Design", "output": [["Explain the process of Human-Centered Design", "Human-centered design\n\nHuman-centered design builds upon participatory action research by moving beyond participants' involvement and producing solutions to problems rather than solely documenting them. Initial stages usually revolve around immersion, observing, and contextual framing— in which innovators immerse themselves in the problem and community. Subsequent stages may then focus on community brainstorming, modeling and prototyping and implementation in community spaces.\nDevelopment\nHuman-centered design has its origins at the intersection of numerous fields including engineering, psychology, anthropology and the arts. As an approach to creative problem-solving in technical and business fields its origins are often traced to the founding of the Stanford University design program in 1958 by Professor John E. Arnold who first proposed the idea that engineering design should be human-centered. This work coincided with the rise of creativity techniques and the subsequent design methods movement in the 1960s. Since then, as creative design processes and methods have been increasingly popularized for business purposes, the standardized and defined human-centered design  is mistakenly equated with the vaguely outlined \"design thinking\".\nIn Architect or Bee?,  Mike Cooley coined the term \"human-centered systems\" in the context of the transition in his profession from traditional drafting at a drawing board to computer-aided design. Human-centered systems, as used in economics, computing and design, aim to preserve or enhance human skills, in both manual and office work, in environments in which technology tends to undermine the skills that people use in their work."]], "corpus": "wikipedia"}
+{"tstamp": 1737776724.4451, "task_type": "retrieval", "type": "chat", "model": "sentence-transformers/all-MiniLM-L6-v2", "gen_params": {}, "start": 1737776722.2327, "finish": 1737776724.4451, "ip": "", "conv_id": "b4d620ba740949c68f8c1240e092f445", "model_name": "sentence-transformers/all-MiniLM-L6-v2", "prompt": "duhh who makes the best diaper for big morons like me", "output": [["duhh who makes the best diaper for big morons like me", "Diaper\n\nA diaper (, NAmE) or a nappy (BrE, AuE, IrE) is a type of underwear that allows the wearer to urinate or defecate without using a toilet, by absorbing or containing waste products to prevent soiling of outer clothing or the external environment. When diapers become wet or soiled, they require changing, generally by a second person such as a parent or caregiver. Failure to change a diaper on a sufficiently regular basis can result in skin problems around the area covered by the diaper.\nDiapers are made of cloth or synthetic disposable materials. Cloth diapers are composed of layers of fabric such as cotton, hemp, bamboo, microfiber, or even plastic fibers such as PLA or PU, and can be washed and reused multiple times. Disposable diapers contain absorbent chemicals and are thrown away after use.\nDiapers are primarily worn by infants, toddlers who are not yet toilet trained, and by children who experience bedwetting. They are also used by adults under certain circumstances or with various conditions, such as incontinence. Adult users can include those of advanced age, patients bed-bound in a hospital, individuals with certain types of physical or mental disability, and people working in extreme conditions, such as astronauts. It is not uncommon for people to wear diapers under dry suits.\nHistory"]], "corpus": "wikipedia"}
+{"tstamp": 1737776724.4451, "task_type": "retrieval", "type": "chat", "model": "intfloat/multilingual-e5-large-instruct", "gen_params": {}, "start": 1737776722.2327, "finish": 1737776724.4451, "ip": "", "conv_id": "c83e322339214f828066bc07cb356f4c", "model_name": "intfloat/multilingual-e5-large-instruct", "prompt": "duhh who makes the best diaper for big morons like me", "output": [["duhh who makes the best diaper for big morons like me", "Omorashi\n\nSimilar sentiments regarding fashion as a tool for overcoming stigmas against adults wetting themselves were previously expressed by the organizers of a 2008 Japanese fashion show for adult diapers aimed at Japan's increasingly elderly population, in which an organizer stated that \"Diapers are something that people don't want to look at, but if you make them attractive, then people can learn about them more easily.\"\nEffect on industry\nIn 2021, NorthShore Care Supply (the leading direct-to-consumer brand of high absorbency adult diapers and incontinence supplies in the United States) published a statement via their website regarding people who wear their products out of preference rather than medical need. It affirmed that \"people who wear adult diapers (aka tab-style briefs) voluntarily [...] have been the best thing to happen to the incontinence products industry since the invention of adhesive tape.\" According to the website, such people have \"driven the whole category past the thin industrial products, past the drug store or even national brands, and into a place where there is a size, fit, thickness, absorbency, color, and yes, even print, for every imaginable application. They are hugely responsible for the mindboggling variety we have to choose from.\"\nDiaper fetishism\nGarment fetishism\nPanty fetishism\nSalirophilia\nUrolagnia"]], "corpus": "wikipedia"}
+{"tstamp": 1737776758.6163, "task_type": "retrieval", "type": "chat", "model": "Salesforce/SFR-Embedding-2_R", "gen_params": {}, "start": 1737776758.3664, "finish": 1737776758.6163, "ip": "", "conv_id": "5d87a6b0420a4e9dbe49d4cf41a8466e", "model_name": "Salesforce/SFR-Embedding-2_R", "prompt": "duhh who makes the best diaper for big morons like me", "output": [["duhh who makes the best diaper for big morons like me", "Title: Genius\n\nAbstract: arXiv admin note: This submission has been withdrawn by arXiv administrators due to inflammatory content and unprofessional language"]], "corpus": "arxiv"}
+{"tstamp": 1737776758.6163, "task_type": "retrieval", "type": "chat", "model": "mixedbread-ai/mxbai-embed-large-v1", "gen_params": {}, "start": 1737776758.3664, "finish": 1737776758.6163, "ip": "", "conv_id": "39c91014dd0d4a50837eab50ce34c418", "model_name": "mixedbread-ai/mxbai-embed-large-v1", "prompt": "duhh who makes the best diaper for big morons like me", "output": [["duhh who makes the best diaper for big morons like me", "Title: Machine-Learning-Enhanced Soft Robotic System Inspired by Rectal Functions for Investigating Fecal incontinence\n\nAbstract: Fecal incontinence, arising from a myriad of pathogenic mechanisms, has attracted considerable global attention. Despite its significance, the replication of the defecatory system for studying fecal incontinence mechanisms remains limited largely due to social stigma and taboos. Inspired by the rectum's functionalities, we have developed a soft robotic system, encompassing a power supply, pressure sensing, data acquisition systems, a flushing mechanism, a stage, and a rectal module. The innovative soft rectal module includes actuators inspired by sphincter muscles, both soft and rigid covers, and soft rectum mold. The rectal mold, fabricated from materials that closely mimic human rectal tissue, is produced using the mold replication fabrication method. Both the soft and rigid components of the mold are realized through the application of 3D-printing technology. The sphincter muscles-inspired actuators featuring double-layer pouch structures are modeled and optimized based on multilayer perceptron methods aiming to obtain high contractions ratios (100%), high generated pressure (9.8 kPa), and small recovery time (3 s). Upon assembly, this defecation robot is capable of smoothly expelling liquid faeces, performing controlled solid fecal cutting, and defecating extremely solid long faeces, thus closely replicating the human rectum and anal canal's functions. This defecation robot has the potential to assist humans in understanding the complex defecation system and contribute to the development of well-being devices related to defecation."]], "corpus": "arxiv"}
+{"tstamp": 1737776786.0055, "task_type": "retrieval", "type": "chat", "model": "voyage-multilingual-2", "gen_params": {}, "start": 1737776785.6994, "finish": 1737776786.0055, "ip": "", "conv_id": "05ad9d8c6a764b489a61e0d402054ef7", "model_name": "voyage-multilingual-2", "prompt": "duhh who makes the best diaper for big morons like me", "output": [["duhh who makes the best diaper for big morons like me", "Electronics Stackexchange\n\nQ: Best humidity/temperature sensor for a nappy? Special needs kids have big troubles with potty training. A 'wee-wee' alarm would be of a lot of help.\nWhat would be a good way of detecting 'it' without electrocuting anybody? A possibility would be to detect humidity or temperature but it really has to be a sturdy sensor. Any ideas?\n\nA: Conductivity is the obvious choice - running the electronics with a 1.5V battery and connecting the electrodes through a high-valued resistor should stop anything bad happening (though don't take that as a guarantee ;)\n"]], "corpus": "stackexchange"}
+{"tstamp": 1737776786.0055, "task_type": "retrieval", "type": "chat", "model": "GritLM/GritLM-7B", "gen_params": {}, "start": 1737776785.6994, "finish": 1737776786.0055, "ip": "", "conv_id": "2af824d87aa2429ab1d5c59f3297f080", "model_name": "GritLM/GritLM-7B", "prompt": "duhh who makes the best diaper for big morons like me", "output": [["duhh who makes the best diaper for big morons like me", "Electronics Stackexchange\n\nQ: Best humidity/temperature sensor for a nappy? Special needs kids have big troubles with potty training. A 'wee-wee' alarm would be of a lot of help.\nWhat would be a good way of detecting 'it' without electrocuting anybody? A possibility would be to detect humidity or temperature but it really has to be a sturdy sensor. Any ideas?\n\nA: Conductivity is the obvious choice - running the electronics with a 1.5V battery and connecting the electrodes through a high-valued resistor should stop anything bad happening (though don't take that as a guarantee ;)\n"]], "corpus": "stackexchange"}